UltiMaker POLYCARBONATE MATERIAL

0 out of 5

£59.00 ex. VAT

Make strong parts that retain dimensional stability, even when heated up to 110 degrees Celsius, with polycarbonate (PC). Not only can UltiMaker PC be used for prototypes, and even some short-run end use parts, it can provide optical translucency for the times you need light to travel through the plastic.
Material properties: Hardness: 81 Shore D | Impact strength: 12 kJ/m² | Thermal resistance: 111 °C
compatibility
UltiMaker 2+ Connect, UltiMaker S3, S5, S7, Factor 4

Need Any Advice?

Got a question about our products? Find out more by calling us on 44 (0) 1295 672600 or click here to get in touch about any product or service.

SKU: 2FOR262-1-1-1-1-1-1 Categories: Consumables, UltiMaker consumables Tag:

Description

Make strong parts that retain dimensional stability, even when heated up to 110 degrees Celsius, with polycarbonate (PC). Not only can UltiMaker PC be used for prototypes, and even some short-run end use parts, it can provide optical translucency for the times you need light to travel through the plastic.
Material properties: Hardness: 81 Shore D | Impact strength: 12 kJ/m² | Thermal resistance: 111 °C
compatibility
UltiMaker 2+ Connect, UltiMaker S3, S5, S7, Factor 4

Related products

  • Clear Resin Cartridge

    Formlabs Clear Resin

    £120.00 ex. VAT
    0 out of 5
    Add to CartView Cart
  • Castablewax40

    Formlabs Castable Wax 40 Resin

    £210.00 ex. VAT
    0 out of 5
    Add to CartView Cart
  • Form 2 Colour Kit

    Colour Kit

    £150.00 ex. VAT
    0 out of 5
  • Formlabs Tough 2000

    Formlabs Tough 2000 Resin

    £150.00 ex. VAT
    0 out of 5